User guide

Note on the laser
lf your device is equipped with a DVD drive, the following condition applies:
The DVD drive contains a light-emitting diode (LED), classified according to
IEC 825-1:1993:LASER CLASS 1; it must not be opened.
Important notes
The mo du lar POS sys tem BEETLE /M-II con forms to the cur rent sa fe ty
stan dards for data pro ces sing equip ment.
n
If this device is taken from a cold environment into the operating room,
moisture condensation may form. The device must be absolutely dry
before being put into service; an acclimatization period of at least two
hours must therefore be observed.
n
This device is equipped with a safety-tested power cable and may be
connected only to a prescribed grounded-contact power socket.
n
When setting up the device, ensure that the power socket on the device
and the grounded-contact power socket are easily accessible.
n
To disconnect the device from the supply voltage completely, switch off
the device and disconnect the power plug.
n
Ensure that no foreign objects (e.g. office clips) find their way into the
device, as this may lead to electric shocks or short-circuits.
n
Never plug in or unplug data communication lines during thunderstorms.
n
Protect devices from vibrations, dust, moisture and heat.
n
Always dispose of used parts, such as batteries, in an environmentally
safe manner.
n
The lateral ventilation slots of the BEETLE /M-II must remain
unobstructed to ensure sufficient ventilation of the equipment. If the
equipment is to be fitted, you must ensure that the specified minimum
distances are maintained and constant ventilation is provided.
IMPORTANT NOTES
2