User guide
Table Of Contents
- Contents
- Manufacturer´s Certification 1
- Introduction 4
- BEETLE /M-II- the individual POS System 8
- BEETLE /M-II- the Components 26
- Configuration variants 38
- Starting up the system 44
- Appendix 46
A LCD screen can be connected alternatively if a TFT adapter is installed.
TFT - LCD Dis play
If a TFT adapter is installed you can connect a Panellink-TFT to the
BEETLE /M-II. Connect the 40-pin data cable of the LCD to the system. The
signals for the touch screen function and the power supply is also made via
this cable. To implement the touch screen functionality for the COM2*
interface you have to change some system settings (see also chapter
Configuration variants).
The COM2* interface is without effect if the onboard TFT adapter with touch
screen function is installed. In this case the interface is not available for
other peripheries.
Con nec ting stan dard PC pe ri phe rals (COM1)
You can connect supplementary standard peripherals to the BEETLE /M-II
via the COM1 serial interface.
Make sure that all supplementary devices are provided with the CE mark.
23
CONNECTING PERIPHERALS