User guide

In addition to the keyboard it is possible to connect a PS/2 mouse via
y-adapter.
When removing cables with locks, please grip the cable at the connector
housing.
Cash dra wer
The BEETLE /M-II has one RJ12 sockets for connecting cash drawers.
Make sure that the connector is plugged firmly into the socket to prevent
malfunctioning. RJ12 plugs lock in when you insert them. Power is supplied
to the cash drawer via this socket, P24V +5% / -10%.
Connecting daisy chained cash drawers and 12V OEM-drawers is
prohibited!
Connect cash drawers only (no telephon).
Scan ners and sca les (COM1 - COM4*)
Depending on the systems configuration, scanners without an independent
power supply are connected to the COM2*, COM3* or COM4* serial
interface (standard setting COM3). Connect scales with their own power
supply to the COM1 interface. COM1 is designed as a 9-pin D-sub plug,
whereas COM2* - COM4* are 9-pin D-sub jacks.
Make sure that the scanner connector is plugged securely into the socket to
prevent possible malfunctioning.
If scales which are not supplied by Wincor Nixdorf International GmbH are
connected to the BEETLE /M-II, you must obtain a Wincor Nixdorf licence
for the driver software.
21
CONNECTING PERIPHERALS