User guide

The powered USB connector is
disengaged by pressing the spring
that is marked by an arrow.
On TFT (LCD) connectors, press the
interlocks on the left and right side.
Ba sic set tings
Ex works, the BEETLE /M-II is configured to your order. Your configuration
must be subsequently adapted to support supplementary devices such as
scanners. For more information, contact the Wincor Nixdorf International
GmbH branch office responsible for your area.
Ad ju sting the loud spea ker
You can set the volume as desired by means of a menu in the BIOS Setup
(see manual “POS Motherboard with Pentium-M Processor”).
Light emit ting di ode (LED)
The LEDs are labelled with HDD for the left light and with POWER for the
right light. The left LED (yellow) lights while the hard disk is beeing
accessed. The right LED (green) lights when the BEETLE/ M-II is switched
on. The LED on the right side will light, when the system is in
Stand-by-mode.
19
BA SIC SET TINGS