User guide
Table Of Contents
- Contents
- Manufacturer´s Certification 1
- Introduction 4
- BEETLE /M-II- the individual POS System 8
- BEETLE /M-II- the Components 26
- Configuration variants 38
- Starting up the system 44
- Appendix 46
The power pack can be connected to all standard power supply networks.
The unit adjusts automatically to the respective voltage. A fan provides the
required ventilation. The maximum output of the power pack is 212 W.
Dis con nec ting ca bles
Never unplug a cable by pulling on the cable itself; always take hold of the
actual plug. Follow the procedure below when disconnecting cables:
n
Turn off all power and equipment switches.
n
Remove the cable cover.
n
Unplug all data communication cables from the sockets of the data
networks.
n
Unplug all power plugs from the grounded-contact power sockets.
n
Unplug all cables from the devices.
With MINI-DIN plugs, the plug
re mains in ser ted un til re lea sed.
Pull the plastic covering from the
connecting socket with your thumb.
The lock is released. The metal of
the plug is visible.
RJ12 plugs lock in when you insert
them. To release them push the
latch under the plug to the top.
DIS CON NEC TING CA BLES
18