User guide
Table Of Contents
- Contents
- Manufacturer´s Certification 1
- Introduction 4
- BEETLE /M-II- the individual POS System 8
- BEETLE /M-II- the Components 26
- Configuration variants 38
- Starting up the system 44
- Appendix 46
Set ting up the de vi ce
Set up the BEETLE /M-II system where it will not be exposed to extreme
environmental conditions. Protect the device from vibrations, dust, moisture,
heat and strong magnetic fields.
The lateral ventilation slots of the BEETLE /M-II must remain unobstructed
to ensure sufficient ventilation of the equipment. Mind the minimum
distances indicated below! If the equipment is to be fitted, you also must
ensure that the specified minimum distances are maintained and constant
ventilation is provided. The immediate ambient temperature of the system
must not exceed 40° C.
The fitting depth may be equal to the overall depth of the equipment
including the cable cover.
Ver ti cal in stal la ti on of the equip ment
Three bore holes are located at the underside which allows the
BEETLE /M-II to be suspended by means of 3 screws. The minimum top
and bottom distances listed in the figure must be maintained; otherwise, a
sufficient ventilation of the equipment is not guaranteed.
BEFORE SWITCHING ON THE SYSTEM
12
80 mm
80 mm