User guide

Before switching on the System
Un pa cking and che cking the Sys tem
Unpack the components and verify that the scope of delivery is identical to
the information on the delivery ticket.
The cardboard box contains the basic unit and a country-specific package.
In addition, the basic unit may be equipped with the hard disk and VGA-card
or a combination of these components.
Should you notice any
n
transport damages or
n
discrepancies between package contents and delivery ticket or
n
functional defects,
please inform your contracting parties or the branch office of Wincor Nixdorf
immediately. Please indicate the number of your delivery ticket and delivery
ticket position and serial number of the respective device. The serial number
can be found on the label illustrated below which is located at the bottom of
the housing; it may be necessary to remove the cable cover and storage
battery.
The se ri al num ber is lo ca ted on the la bel be low the bar code.
It is absolutely necessary to check the function of the original equipment
before you perform any changes (e.g. by installing an expansion card).
Only then is it possible to accept a functional defect as a claim.
We recommend saving the original packaging for transport at a later time
(protection from impact and shock).
11
BEFORE SWITCHING ON THE SYSTEM
Wincor Nixdorf
Made in Singapore
WN0199900107
BEETLE /M-II
017500 000000
100-120V / 200-240V
50/60 Hz 5/3 A