User manual

PLINK TFT (TFT- VGA Mo ni tor, optional)
If a TFT adapter is installed you can connect a Panellink-TFT to the
BEETLE /S-II plus. Connect the 40-pin data cable of the LCD to the system.
The signals for the touch screen function and the power supply is also made
via this cable. To implement the touch screen functionality for the COM1 or
COM2* interface you have to change some system settings in the BIOS
setup.
The COM4* in ter fa ce is used in ter nal ly for the Touch screen
functi on and thus is not avai la ble for the ope ra ti on of ot her
pe ri phe ral de vi ces.
DVI-I, DVI-D (op tio nal)
There is a DVI-I jack available to connect a high resolution TFT monitor.
The DVI jack has a dual link contact, enabling the transmission of video
signals with a max. resolution of 2560×1600 pixels/60 hz.
The DVI-D interface is optional available. DVI-D transfers digital image data
and DVI-I (I=integrated) transfers digital and analog image data.
CRT (op tio nal via a DVI/VGA adap ter ca ble)
Via a DVI/VGA adapter cable you can connect a CRT monitor at the POS
system. It is plugged at the DVI-I jack.
BEETLE /S-II plus 23