User manual

ON But ton
With a power supplied power unit you switch on the system with the power
ON button on the front side of the system unit.
Light-emit ting Di ode (LED)
The LEDs are labelled with:
HDD
left LED flashs
yellow
While the hard disk is beeing
accessed
POWER
right LED
lights orange
Stand by mode
right LED
lights green
Device is switched on
USB (Uni ver sal Se ri al Bus)- A, USB 2.0
Interface (USB-A) for connecting different USB peripheral devices such as
scanners or scales.
You must use only shielded cables for the connection of USB devices.
BEETLE /S-II plus 15