User manual

P- USB- Hub (optional)
There are three 12V P-USB interfaces and one 24V P- USB on an optional
available board. They allow the connection of peripherals such as printers
and scanners. Devices like Hard Disks may also be connected via a USB
interface.
You can connect or disconnect USB devices during operation of your
BEETLE, provided that these devices comply with the specifications
according to usb.org.
Peripheral devices with a high power requirement (such as PoweredUSB
printer) should be connected to or disconnected from your BEETLE system
only after the BEETLE has been switched off.
36 BEETLE /i8A-3