User manual

D- Sub, 25 pin (LPT1, Modular Printer)
The standard parallel interface LPT1 is intended for connecting a printer.
D- Sub, 15 pin (VGA)
You can connect a monitor to the BEETLE /i8A-3 via the 15-pin D-sub jack
on the CRT adapter.
LAN (RJ45)
The system can be connected to a network (LAN) from the POS terminal
back panel.
LEDs
right LED
constant yellow Connected with network
flashs yellow Data transfer
left LED
off 10mBit/s
constant green 100mBit/s
Only con nect shiel ded LAN ca bles (CAT5/CAT5e) as the se of fer a
bet ter pro tec ti on in case of in ter fer en ces in a net work.
BEETLE /i8A-3 29