Technical data

Manufacturers Certification and notes
01750185706 D BEETLE /i8A POS System – Operating Manual 4
 You should connect your BEETLE or other IT-devices only to power supply
systems with separately guided protective earth conductor (PE). This kind
of electricity system is known as TN-S network. Do not use PEN
conductors!
 Please also observe the recommendations of the norm DIN VDE 0100, Part
540, Appendix C2 as well as EN50174-2, §5.4.3. Thus, you can help to
avoid possible malfunctions.
 You can connect or disconnect USB devices during operation of your
BEETLE, provided that these devices comply with the specifications
according to usb.org.
Other peripheral devices with higher power requirement (such as Powered
USB printer) should be connected to or disconnected from your BEETLE
system only after the BEETLE has been switched off.
Power Cord Selection
If power cord is not provided with the display, user has to ensure that a
certified power cord is used as required by the Safety Regulation of the
country.
Countries Safety Approvals
USA UL
Canada CSA
Germany VDE
Japan PSE
Taiwan BSMI
China CCC
For other countries not mentioned in the above list, please check with
the local authority.