Technical data

Appendix
01750185706 D BEETLE /i8A POS System – Operating Manual 40
The system then determines the medium from which the operating system and
POS application are to be booted. Each medium is assigned a logical drive
according to the configuration of your BEETLE /i8A.
The following media can be assigned a drive:
 Network
 Hard disk
 CD-ROM
The logical drives are designated C: and D:
The network is always assigned to the C: drive during the runup procedure.
The hard disk can be assigned to the C: or D: drive. The system can only be
started from the hard disk if the disk has been configured as the C: drive.
The boot priority can be set to the user preference via the BIOS
SETUP menu.
If the operating system has started up without error, the POS application
software is automatically booted if necessary.