Technical data

Disconnecting cables
27 BEETLE /i8A POS System – Operating Manual 01750185706 D
12V DC Jack
This port is intended to supply 12V power to LCD monitor. Rated current is
3A
4-pin 12V LCD Out
This port is intended to supply 12V power to LCD monitor. The pin
assignment for the 4-pin connector is as shown below. Rated current is 3A.
Use only appropriate power cable supplied by Wincor Nixdorf.
Before connecting the LCD monitor to the 12V DC Jack or the 4-pin 12V LCD
Out, make sure that the power requirement of the LCD monitor does not exceed
the rated current of the ports.
Pin 1
12V
Pin 3
NC
Pin 2
GND
Pin 4
NC
!
WARNING