Manualshelf

Technical data

ManualsBrandsWincor Nixdorf ManualsComputer equipmentBEETLE /i8A-3
21222324252627282930
Power supply
21 BEETLE /i8A POS System – Operating Manual 01750185706 D
At the front side of the box you will find the ON button which will turn on the
system.
The system is automatically switched off, when the operating system is shut
down. Pushing (approx. 5 seconds) the ON button at any time will shut
down the system. The proper function of the ON button is defined by the
settings of the operating system and the BIOS. The power cord receptacle,
and the power socket for the printer are located on the back of the BEETLE
system.
The power pack must be removed or replaced by authorized quali-
fied personnel only. Only replace power packs released by Wincor
Nixdorf.
To disconnect the device from the supply voltage completely,
switch off the device and disconnect the power plug.
Power Input
Connect the plug of the power cord to this port and the other end to the AC
main socket. Pull the main plug to power-off the device completely.
!