User manual

Swipe Card Reader (optional)

The swipe card reader can read three ISO tracks simultaneously in one

single swipe.

The MSR module is fitted on the right-hand side of the screen module. The

connection is made via the keyboard interface (see manual swipe card rea

der).

How to Operate

Run the swipe card through the slit of the swipe card reader from top to bot

tom in a quick and steady movement. Make sure that the magnetic strip is

to the right.

When using swipe cards, the following should be observed:

n swipe cards should never be allowed to come into contact with liquids.

n swipe cards should not be bent or folded in any way.

n swipe cards should not be allowed to come into close contact with a

magnetic field.

Swipe cards should only be inserted in the top of the specially designed slit

of the reading device. If the card is inserted in another place, the reading

head could be damaged.

Cleaning Instructions

In order to guarantee good reading results over a longer period of time, the

swipe card reader should be cleaned once a week. This is carried out by

using a special cleaning card that can be purchased from Wincor Nixdorf

International GmbH.

Clean the surface of the swipe card reader with a suitable commercially

available surface cleaner.

Make sure that the power plug is disconnected, connector cables are un

plugged and that no liquid finds its way into the device.

SWIPE CARD READER (OPTIONAL)