User manual

Construction of the resistive Touch Screen:
Hard-coated polyester topsheet
Adhesive
Glass substrate with spacer Dots
How to Operate
Touching the touch screen has the same effect as clicking the left mouse
button. You only need to apply a little pressure with the fingertip. In this re-
sistive process not only fingertip contact is recognized. The screen does
react in any way if touched, for example, with a stylus. The recommended
material for a stylus is polyacetat. The stylus should have a minimum
spherical radius of 0.8 mm and contain no sharp edges or burrs that may
cause damage to the topsheet.
Before adjusting the screen angle switch off the system!
Cleaning Instructions
Always turn off the system before cleaning.
The surface of your Touch Screen should be cleaned with a water-based
solvent or a non-abrasive cleaner.
Do not use solvents containing acetic acid or methylene chloride.
Use a soft, fine-meshed cloth to clean the surface. Dampen the cloth
slightly and then clean the screen.
35
RESISTIVE TOUCH SCREEN (OPTION)