User manual

Yes (*3)= serial mouse and modem at COM1 or COM2 leave this mode,

swipe card reader and scanner at COM1 or COM2 lead to incorrect condi

tions. Devices, connected to COM3 or COM4, do not leave this mode.

The power saving must not be set to “enable” in the BIOS setup.

If you use the BEETLE/iPOS without mouse and keyboard, the following

settings are necessary in the menu "Settings à Control Panel à Power

Management”

System standby: never

Turn off monitor: never

Turn off hard disks: never

If you still want to use a screen saver then choose

“Settings à Control Panel à Display”, then click on the tab “Screen saver”

and set “Blank Screen” in the Screen saver menue.

Only these settings will guarantee that the system can be activated by the

touch screen.

POWER MANAGEMENT