User manual

Power Management
The power management (PM) is a software activating the energy saving
mode. For example, the screen can be switched off after a defined period of
time, thus saving energy and the screen.
The possible PM conditions take you please from the following table:
Power
State
(Mode)
Conditions
LED
DSP(*1)
How to get into this mode
Wake up ON
PS/
Mouse,
KYBD,
USB
COM
De-
vices
Touch LAN Time
Off by
Power
cord
Off Off Power cord not connected - - - - -
Off by
Button
(no Soft
off)
Off Off
Power switch on, system
returned from DOS or illegal
mode.
----
Soft off Off Off
Normal Shut down from
Windows OS (Requirement for
Wake up on Time or Wake up
on LAN).
- - - - Yes (*2)
Soft off Off Off
Hibernating mode from Win2K
or WinXP (Shut down prepared
for quick start with logon last
user).
----No
Standby Orange Off
Standby Mode from OS
Windows (PM settings or
directly selected in the Shut
down window of Win98).
Yes Yes(*3) No No -
Standby Orange
On,
blank
DSP
PM settings: Turn off monitor
(after selected time).
Yes Yes(*3) Yes No -
Standby Orange On
Sleep Mode from BIOS.
OS Windows does not work.
Yes Yes(*3) No No -
Screen
saver
(working)
Green
On,
blank
DSP
PM settings: always on, Screen
saver on with blank screen.
Yes Yes(*3) Yes - -
DSP (*1) = display
Yes (*2) = Wake UP of LAN and Time need to be activated in the BIOS
settings.
POWER MANAGEMENT
26