User manual

25
INSTALLING WINDOWS OPERATING SYSTEMS
Windows 98 SE
After you have finished the activities as described above, the following
procedure installs the operating system
n
BOOT from the prepared DOS-BOOT-CD or floppy drive
n
If a bootable CD is used, remove the CD and insert Win 98SE
installation CD
n
Change prompt to CD (e.g. D:)
n
Copy folder Win98 incl. sub-folders to FAT32-formatted HDD
n
Change prompt to HDD (e.g. C:\Win98)
n
Run SETUP.EXE to start installation
Notice: Windows 98 needs USB-CD-ROM driver to support USB-CD-ROM
drives. The driver is delivered with the CD ROM drive.