User manual

When an onboard TFT adapter with Touch Screen function is installed, one

of the COM interfaces for external connections is without effect. If a POS

board is installed, the four COM interfaces are usable.

Make sure that the connectors are plugged securely into the sockets to

prevent possible malfunctioning.

COM3 and COM4

The optional POS-Board provides a COM3 and a COM4 interface, without

power supply. It is possible to install standard peripherals with separate

power supply, like a scale, a printer or a modem.

Dual Monitor

If a CRT adapter is installed, you can connect a monitor to the system via

the 15-pin D-sub jack on the CRT adapter. The power of the monitor is

supplied by a separate power cord.

Network

If a 10/100 BaseT network board is installed, the system can be connected

to a network (LAN) at the POS terminal back panel. You can install

alternativelly a wireless LAN (IEEE802.11b).

You must only use shielded twisted pair cables.

CONNECTING PERIPHERALS