User manual

Keyboard (KYBD)
The BEETLE /iPOS has a 6-pin mini-DIN jack for connecting a keyboard.
Make sure that the connector is plugged firmly into the socket to prevent
malfunctioning. Power is supplied to the keyboard via this socket. If you
wish to connect an older standard PC keyboard with DIN connector, you
must use a special adapter cable, obtainable from the WN branch office
responsible for your area.
You can connect a mouse in parallel via a Y-cable.
COM1* and COM2*
Devices without an independent power supply are connected to the COM1*
or COM2* serial interface, depending on the systems configuration. COM1*
and COM2* are designed as 9-pin D-sub jacks.
Following devices can be connected:
Scanner
Customer display
Cashier display
Hybrid card reader
Each port will provide 12V with max. 600mA, 5V with max. 300mA.
CONNECTING PERIPHERALS
20
KYBD
COM2*COM1* LAN/ASYN
LPT1
SPK
MIC
CASH
DRAW
USB
CRT
COM3