User manual

The switch for the adjustment of the power

supply is next to the power plug.

Note: False setting will destroy power rack.

Basic settings

Ex works, the BEETLE /iPOS is configured to your order. Your configuration

must be subsequently adapted to support supplementary devices such as

scanners. For more information, contact the WN branch office responsible

for your area.

Connecting to the mains power supply

All devices belonging to the compact BEETLE /iPOS system that have a

separate power cable must be connected to the same electric circuit.

Make sure that all data cables on the system unit and peripherals are

connected correctly.

Plug all power cables belonging to the BEETLE and the peripherals into

the grounded-contact power sockets.

You can now switch on the BEETLE /iPOS by pushing the ON-button at the

front of the box. Pushing (approx. 4 sec.) the button again will lead to a

standby mode. To disconnect the device from the supply voltage complete

ly, disconnect the power plug.

ADJUSTING THE MAINS VOLTAGE

KYBD

COM2*COM1* LAN/ASYN

LPT1

SPK

MIC

CASH

DRAW

USB

CRT

COM3

115V