User manual

Mounting the Cable Cover
BEETLE /iPOS is delivered with a cable cover. You should have laid the ca
-
bles before applying this cable cover on the back of the device.
No tools are required, the cover can be released manually.
Place the notches
of the cable cover
on the cross
beams of the
footed stand (1).
Close the cable
cover by moving it
from the rear to the
front (2).
Adjusting the Mains Voltage
The power supply can be connected to all standard power supply networks.
The unit must be adjusted to the respective voltage by means of the switch
next to the mains connector. The maximum output of the power pack in the
system is 65W.
Proceed as follows:
n
Tilt the screen backwards.
n
Remove the cover from the loudspeakers. Now you can easiliy reach the
ports.
n
Pull up the cover in your direction.
17
CONNECTING TO THE MAINS POWER SUPPLY

