User manual

Disconnecting cables

Never unplug a cable by pulling the cable but take hold of the actual plug it

self. Follow the procedure below when disconnecting cables:

Turn off all power and equipment switches.

Remove the cable cover.

Unplug all data communication cables from the sockets of the data

networks.

Unplug all power plugs from the grounded-contact power sockets.

Unplug all cables from the devices.

With MINI-DIN plugs, the plug remains inserted

until released.

Pull the plastic covering from the connecting

socket with your thumb. The lock is released.

The metal of the plug is visible.

RJ12 and RJ45 plugs lock in when you insert

them. To release them push the latch under the

plug to the top.

The D-sub typ connector is used for parallel or

serial interfaces. Release the connector by

loosening the two screws.

Take hold of the USB connector housing and

release the connection.

DISCONNECTING CABLES