User manual

Before switching on the System

Unpacking and checking the System

Unpack the parts and check to see whether the delivery matches the infor

mation on the delivery note.

The carton contains the basic unit and a country-specific accessories kit.

Some ordered composition may be installed.

If damage has occurred during shipping or if the package contents do not

match the delivery note, promptly inform your Wincor Nixdorf sales outlet.

Transport the device only in its original packaging (to protect it against im

pact and shock).

Setting up the device

Set up the BEETLE system where it will not be exposed to extreme environ-

mental conditions. Protect the device from vibrations, dust, moisture, heat

and strong magnetic fields.

If the equipment is to be fitted, you must ensure that the specified minimum

distances are maintained and constant ventilation is provided. The minimum

distance upwards is 10 mm. The immediate ambient temperature of the sys-

tem must not exceed 40° C/104 °F. These requirements are met, for exam-

ple, if the equipment is not built into an enclosed piece of furniture.

Adjustment of the Footed Stand

For a better stand or utilisation of the footprint, the footed stand is adjustab

le. Ensure that the footed stand is inserted in case a 12,1” screen is

installed and is pulled out in case a 15” screen is installed.

Adjust the position of the footed stand as follows:

Remove the cable cover (see page 12).

BEFORE SWITCHING ON THE SYSTEM