User guide

Battery (optional)
The battery bridges any power failures and allows a controlled shutdown of
the POS programm by the appropriate software (see “Security in the event
of power failure”).
The rechargeable battery provides the modular BEETLE /M-II plus POS
system with another significant performance feature.
For operating a battery the BEETLE /M-II plus must be equipped with an
UPS power supply unit.
BEET LE /M-II plus with Bat te ry
Se cu ri ty In the Event Of a Po wer Ou ta ge
It takes approximately 6 hours to fully charge the battery after the unit has
been switched on for the first time. The system only charges the battery
when it is switched on and the RDI system software is loaded and
configured for a rechargeable battery.
If a power outage occurs, the system remains fully functional for a short
period of time. In such cases, the battery supplies the system with power for
continued operation. This allows the unit to bridge power outages for a
certain, software-dependent, period of time.
37
SE CU RI TY IN THE EVENT OF A PO WER OU TA GE