User guide

Introduction
The BEETLE /M-II plus is the powerful and economical basis for your POS
system. Powerful processors ensure a quick processing of all operations.
You can connect a variety of different peripheral devices to your
BEETLE /M-II plus and even the choice of the software is not limited to a
certain product.
This provides you with a considerable degree of flexibility when arranging
the configuration of your POS system.
The BEETLE can also be connected to a network once an appropriate
network card has been installed.
Whatever configuration you need: Wincor Nixdorf International GmbH offers
the right solution. So, whenever you want to expand your BEETLE /M-II
plus, please contact your Wincor Nixdorf International GmbH branch office
or your dealer.
About This Manual
This documentation is intended to help you to work with the POS system
and to serve as a reference work. The detailed table of contents help you
find the desired information quickly and easily.
Notes in the manual are marked by this symbol.
This symbol is used for warnings.
The type and scope of application programs depend on the customer’s own
selection; therefore, software will not be discussed further in this manual.
You will find a description of the BIOS Setup and the Central Processing
Unit in a separate manual (“POS Motherboard, H1-CPU”, "POS
Motherboard, G1-CPU"), see
http://www.wincor-nixdorf.com/internet/site_EN//EN/Support/Downloads/
POSLotterySystems/Manuals/manuals_node.html.
ABOUT THIS MANUAL
4