User guide

(2) = If a D-SUB connector is mounted at COM2, the interface does not
have a separate power supply.
ASYNC controller
LAN controller
I/O base address range 02E8H - 02EFH
Interrupt IRQ12
Connection 9-pole D-SUB jack
DP8
RAM 8KB, default CC00h - CDFFh
(only in shared memory mode)
I/O address range 32 Byte, default 240h - 25Fh
Interrupt IRQ5
BOOT PROM 16 KB, default C8000h - CBFFFh
Connection 8-pole telephone jack RJ45
10BaseT (max. 100 m cable length)
Appendix
GB - 75