User guide

In this mask you can define whether an extended self test should be run
before starting the operating system. The extended self test only
comprises of the POS-specific components.
The following three Setup-settings are used when a Legacy-PC-card is to
be plugged in. These cards can not inform the system BIOS which
Interrupt, DMA-channel or memory range below 1 MB they seize. The
jumper configuration of the Legacy-card must be communicated to the
BIOS with the following screen masks before installing the card! Setting a
parameter to RESERVED means that this Interrupt, DMA-channel or
memory range cannot longer be used for the automatical configuration by
the BIOS or operating system.
Legacy ISA Mem. Addr
(3) List Params
(8)Prev (6)Incr
(2)Next (4)Decr
Extended POST
Yes
(8)Prev (6)Incr
(2)Next (4)Decr
BIOS setup
GB - 70