User guide

With the following mask you can activate the sound function. Please mind
that the following system resources are used: I/O addresses 220-22Fh,
330-331h, 388-38Bh, Interrupt 5 and the DMA channels 3 and 5. These
parameters are displayed.
In the next mask you can set the boot sequence. The basic configuration
starts from the diskette drive. Alternatively you can start the operating
system from the hard disk, a CD-ROM drive or a network-card (with an
according Boot PROM).
Sound Configuration
Disable
(8)Prev (6)Incr
(2 Next (4)Decr
Boot first from
Diskette Driver
(8)Prev (6)Incr
(2)Next (4)Decr
BIOS setup
GB - 69