User guide

The following functions of setup normally are not changed. Here Setup
can terminate the settings. If you wish to change the boot sequence, to
activate the sound function or to set interrupt, DMA or the memory range
for legacy cards, the following points are important:
This option changes the start-up-time of hard disks. Normally 6 seconds
are sufficient, but you can set a time between 3 and 30 seconds if you use
hard disks with a different boot period.
Special functions
following ———>>
(8)Prev
(2)Next
Hard Disk Pre-Delay
6 Seconds
(8)Prev (6)Incr
(2)Next (4)Decr
BIOS setup
GB - 68