User guide

The following media can be assigned a drive:
Starting up the system
Disk
Network
Hard disk
Memory card
CD-ROM
The logical drives are designated A:, B:, C: and D:.
If the system is to be booted from disk, this medium must always be
assigned drive A:. The network is always assigned to the C: drive
during the runup procedure. The hard disk can be assigned to the C: or
D: drive. The system can only be started from the hard disk if the disk
has been configured as the C: drive.
Corresponding to the Setup configuration the modular BEETLE /M
POS system can be booted from the following drives:
Floppy disk in drive A:
Hard disk in drive C:
CDROM in EL TORITO format
Network adapter with BOOTPROM
Please mind that the storage medium must be system-boot-capable.
The following priorities apply:
As standard the POS system always attempts to boot from a disk first if
it is inserted in the respective drive.
Floppy disk (A:) High priority
Network (C:) Medium priority
Hard disk (C:) Low priority
Starting up the system
GB - 54