User guide

Battery
Battery
The battery bridges any power failures and allows a controlled
shutdown of the POS programm by the appropriate software (see
“Security in the event of power failure”).
Battery charging time is approx. 8 hours after initial
startup. The battery is charged only while the system is
switched on.
The table below provides an overview of how long the BEETLE /M is
supplied with battery power in the event of a power failure (with the
battery fully charged).
Peripherals connected to the power output socket of the
POS terminal are not powered during a power failure.
Duration of
power supply Power output Operation
0, 5 minutes Full load with supply of external
(max. 90 W) peripherals and 24V printer
running
1, 5 minutes Medium load with supply of external
(approx. 70 W) peripherals
10 minutes Low load (30 W) e. g. device switched on
Battery
GB - 36