User guide

Additional slots on the CPU
The CPU is equipped with two additional slots which can be used to
connect the optional available controllers ( LAN or ASYNC, CRT
(monitor) or TFT (SNIkey)), if required (see Configuration variants).
Power pack
Powe r pack
The power pack can be connected to all conventional power supply
networks. It automatically adjusts itself to the particular voltage and is
fan-cooled. The power output of the power pack is maximum 150 W.
The power pack must be removed or replaced by
authorized qualified personnel only.
The power cord receptacle, the power output socket for the monitor
and the ON/OFF switch are located on the back of the BEETLE /M.
At the front side you will find the ON button which will turn on the
powerpack (and the system) if the ON/OFF switch at the rear side is in
the position ON. Pushing the ON button again will turn the powerpack
off.
TheONbuttoncanbe
protected from access
using the lockable slide.
Lock Slider ON button
ON/OFF switch
Power pack
GB - 35