User guide

Monitor
If a CRT adapter is installed, you can connect a monitor to the
BEETLE /M via the 15-pin D-sub jack on the CRT adapter. Power is
supplied to the monitor via the AC-outlet on the BEETLE /M, located
on the back of the housing.
A LCD screen can be connected alternatively if a TFT adapter is
installed.
SNIkey / Screen display
If a TFT adapter is installed you can connect a SNIkeyTFT to the
BEETLE / M without using a ISA slot. Connect the 50-pin data cable of
the SNIkey to the system. The signals for the touchscreen function and
the power supply are also effected via this cable. To implement the
touchscreen functionality for the COM2 interface you have to change
some system settings (see GB-43).
If the SNIkey is equipped with a keyboard cable connect this with the
KYBD terminal. You can only connect one keyboard cable to the
BEETLE /M at one time - either that of the SNIkey or that of the free
standing keyboard (e.g. PC keyboard, TA57, TA61)
To find out how to connect a second keyboard, refer to the user guide
of the SNIkey.
Connecting peripherals
GB - 24