User guide

Connecting peripherals
Connecting peripherals
The peripherals mentioned here are available as options and are not
part of the basic configuration. A separate manual is provided for each
of the connectable components. For more detailed information, please
consult the relevant documentation.
The figure shows the back panel of the BEETLE/ M with the locations
of the connecting sockets and connecting plugs. If you wish to connect
a monitor, however, you must also have a video board. You can connect
the system to a network via an expansion board.
The interfaces COM7 and COM8 are optional.
CRT and TFT interfaces are used alternatively.
Connecting peripherals with the system switched
on is not allowed.
Rear panel of the BEETLE/ M
ON
DC24V
KYBD
COM4 COM3 COM2 COM1USB LAN/ASYN
CRT/TFT
Battery
1
2 LPT1
110-120 V / 2 A max
200-240 V / 1 A max
COM7
COM8
Connecting peripherals
GB - 20