User guide

Basic settings

Ex works, the BEETLE /M is configured to your order. Your

configuration must be subsequently adapted to support supplementary

devices such as scanners. For more information, contact the Wincor

Nixdorf branch office responsible for your area.

Adjusting the loudspeaker

You can set the volume as desired by means of a menu in the BIOS

Setup.

Light emitting diode (LED)

The right LED (yellow) below the ON/OFF switch lights up while the

hard disk is beeing accessed. The left LED (green) lights when the

BEETLE/ M is switched on.

Adjusting the loudspeaker

GB - 19