User guide

Disconnecting cables
Disconnecting cables
Never unplug a cable by pulling on the cable itself; always take hold of
the actual plug. Follow the procedure below when disconnecting cables:
Turn off all power and equipment switches.
Remove the cable cover.
Unplug all data communication cables from the sockets of
the data networks.
Unplug all power plugs from the grounded-contact power
sockets.
Unplug all cables from the devices.
With MINI-DIN plugs, the plug
remains inserted until released.
Pull the plastic covering from
the connecting socket with your
thumb. The lock is released.
The metal of the plug is visible.
RJ12 plugs lock in when you in-
sert them. To release them
push the latch under the plug to
the top.
Now remove the cable from the connecting socket.
Disconnecting cables
GB - 18