User guide

Connecting to the mains power supply

All devices belonging to the modular BEETLE /M POS system that

have a separate power cable must be connected to the same electric

circuit.

Ensure that the power switch on the POS terminal housing

is switched off.

Make sure that all data cables on the system unit and

peripherals are connected correctly.

Plug all power cables belonging to the BEETLE and the

peripherals into the grounded-contact power sockets.

You can now

switch on the

BEETLE /M by

means of the

switch on the rear

of the housing

and push the ON

button at the front

for a short time.

You may have to

unlock the slide

and move it to the

left.

The power pack can be connected to all standard

power supply networks. The unit adjusts auto-

matically to the respective voltage. A fan

provides the required ventilation. The maximum

output of the power pack is 150 W.

Lock

Cover

ON button

Slide

ON/OFF switch

Cabling of the BEETLE

GB - 17