Technical data

32 BEETLE iSPRINT POS System – Operating Manual 01750096993 E
To load the BIOS default, from the dialog box,
choose ‘Y’ followed by [ENTER] key.
To exit this section without loading the BIOS
default, from the dialog box, choose ‘N’ followed by
the [ENTER] key.
Load Optimized
Default
To load the BIOS default values that are factory
settings for optimal performance system operations.
While AWARD has designed the custom BIOS to
maximize performance, the factory has the right to
change these defaults to meet their needs.
To load the BIOS optimized default, from the dialog
box, choose ‘Y’ followed by [ENTER] key.
To exit this section without loading the BIOS
optimized default, from the dialog box, choose ‘N’
followed by the [ENTER] key.
Supervisor/User
Password
To set supervisor / user password.
Make sure you don’t forget the password or else
you can not access the BIOS. If you forgot about
the password, the only way you can access the
BIOS is by resetting it using the reset jumper on the
motherboard.
Save & Exit Setup To save CMOS value changes to CMOS and exit
setup.
From the dialog box, choose ‘Y’ followed by
[ENTER] key.
Exit Without Saving To abandon all CMOS value changes and exit
setup.
From the dialog box, choose ‘Y’ followed by
[ENTER] key.
NOTE


NOTE


NOTE


NOTE

