Technical data

30 BEETLE iSPRINT POS System – Operating Manual 01750096993 E
System BIOS
This section describes the AWARD BIOS™ Setup program built into
the ROM BIOS. The Setup program allows users to modify the basic
system configuration. The BIOS information is stored in a battery-
backed RAM so that it retains the Setup information when the power
of the system is turned off.
The BIOS reads the system information contained in the CMOS and
begins the process of checking out the system and configuring it.
When it finishes, the BIOS will seek the operating system on one of
the disks to launch and turn the control over to the operating system.
The Setup program can be activated by pressing the [DEL] key when
the following message appears at the bottom of the screen during the
POST (Power On Self-Test).
Press [DEL] to enter SETUP.
Below is the menu displayed while entering the Setup program.
CMOS Setup Utility - Copyright ( C ) 1984-1998
Standard CMOS Feature
Advanced BIOS Feature
Advanced Chipset Feature
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health
Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Esc : Quit     : Select Item
F10 : Save & Exit Setup
Time, Date, Hard Disk Type….