Technical data

01750096993 E BEETLE iSPRINT POS System – Operating Manual 21
12V Power Output Jack
The BEETLE iSPRINT is equipped with a 12VDC output supplying to a
maximum of 2A for powering a LCD display.
24V Power Output Jack
The BEETLE iSPRINT is equipped with a 24VDC output supplying to a
maximum of 3A for powering a printer.
Expansion Slots
The BEETLE iSPRINT has two PCI bus master expansion slots on
board. One of the slot is designed for the Riser Card.
Power Supply Unit
The power supply unit automatically adjusts itself to the particular
voltage. The total output of the power supply unit is maximum 245W.
It has a 24V output and cash drawer control interface.
VGA Connector for CRT Monitor or LCD-Display
A CRT monitor or LCD-Display could be connected to the BEETLE
iSPRINT via the 15-pin D-SUB jack on the VGA connector.
Make sure that the connector is plugged firmly into the socket to
prevent malfunctioning.
Keyboard Connector (PS/2)
The BEETLE iSPRINT system has a Purple 6-pin Mini-DIN Jack for
connecting a keyboard using a PS/2 plug.
!
CAUTION