Technical data

14 BEETLE iSPRINT POS System – Operating Manual 01750096993 E
Cabling of the system
Follow the following steps when installing the cables of the system:
 Remove the cable cover, if present.
 Plug one end of the power cable into the socket of the BEETLE
iSPRINT system and plug the other end of the power cable
into the grounded socket at the main power supply.
 Plug in and secure all the required data cables.
Always make sure that the system is switched off
when you do any cabling works.
Connecting to the main power supply
All devices belonging to the modular BEETLE iSPRINT system that
have a separate power cable must be connected to the same electric
circuit.
 Ensure that all data cables on the system unit and the
peripherals are connected correctly.
 Plug all the power cables belonging to the BEETLE iSPRINT
system and the peripherals into the grounded-contact power
sockets.
!
WARNING