Product manual

Introduction
1
Introduction
The POS Board is designed for the motherboard “D2 Basic”, as
additional COM ports and the cash drawer Interface were needed.
The POS Board has implemented the RS232 standard interfaces
for COM3, COM4, COM6 and the reduced RS232 Interface (TxD and
RxD only) COM5 for the touch functionality (COM6 is provided for
future applications).
The POS Board integrates the Cash Drawer Logic as well as the power
supply generation for the cash drawer.
In this manual you will find the description of the connector assignment,
the touch screen installation and the installation of the COM ports.
This description is intended first and foremost for technical service
personnel; substantial knowledge, sufficient experience and specialised
skills in the handling of operating systems (MS-Windows; Linux),
configuration and installation procedures are therefore assumed.