Product manual

Installation of COM Ports
9
 Confirm by a click on OK but do not reboot the BEETLE when
prompted!
 Continue with „ADD NEW“ until you reach COM5: Then continue
with next topic.
 Reboot the BEETLE when prompted!
Set the Windows registry key
HKLM\Software\Services\Serial\permit_share to 1 for correct function of
OPOS - see also OPOS manual!
If your application runs in multiple windows and you want to avoid
continuous close / open sessions of COM ports in your application, you
need this feature, too.
Windows 2000
It is good practice to run BIOS setup and check for correct setting of port
COM3: to COM5: (COM6:) before start of installation.
You can confirm all the following settings by (multiple) clicks on
OK NEXT or FINISHED button.
Windows 2000 is a full-featured PnP operating system. Therefore, it is
quiet sensitive for all resources configuration in the D2basic PnP BIOS
resources and settings for the POSBOARD.
 Install OEM Windows 2000 from CD.
 Before any other action install at least the driver for Intel i815E
chipset!
 Install all plug and play (PnP) devices now:
Network adapter (onboard), Intel graphics driver, audio ...