User manual

BIOS Setup
49
Power State [Stay off]
This allows you whether you want your system to reboot after the power has
been interrupted. [Stay off] leaves your system off and [Restore] reboots your
system if it was active before power loss. Configuration options: [Stay off]
[Restore] [Follow AC / Power]
Power Savings [Disabled]
This field acts as the master control for the power management modes.
[Disabled] disables the power saving features. [Enabled] allows you to set power
Standby Timeout from Disabled to 8 minutes. Configuration options: [Disabled]
[Enabled]
Resume On Time [Disabled]
This allows an unattended or automatic system power up. You may configure
your system to power up at a certain time. The Wakeup Time is to setup in the
next field down of this field. Configuration options: [Disabled] [Enabled]
Wake Up On LAN [Disabled]
Wake-Up-On-LAN allows your BEETLE to be booted from another computer via
a network by sending a wake-up frame or signal. Configuration options:
[Disabled] [Enabled].
HardWare Monitor
CPU Temperature: 44 Û&
CPU Fan Speed 4448 rpm
PowerSupply Fan Speed 2766 rpm
+VCC DUA Voltage 5.29 V
-12V Voltage 13.66 V
+12V Voltage 12.67 V
+VCC Voltage 5.29 V
+3.3V Voltage 3.20 V
+3.3V DUA Voltage 3.45 V
+1.8V Voltage 1.90 V
+VCC ID Voltage 1.85 V
+VBatt Voltage 3.13 V