User manual

BIOS Setup
48
Security Menu
Supervisor Password Is: Clear
Set Supervisor Password [Enter]
Processor Serial Number [Disabled]
Set Supervisor Password
This field allows you to set the password. Highlight the field and press <Enter>.
Type a password and press <Enter>, you can type up to eight alphanumeric
characters. Symbols and other keys are ignored. To confirm the password, type
the password again and press <Enter>. The password is now set to [Enabled].
This password allows full access to the BIOS Setup menu.
To clear the password, highlight this field and press <Enter>. The same dialog
box as above will appear. Press <Enter> and the password will be set to
[Disabled].
Processor Serial Number [Disabled]
This setup point is displayed only if a Pentium Cpu is installed in the mainboard.
Some software packagess would like to read the serial number of such a
processor for protecting their software.
Power Menu
The Power menu allows you to reduce power consumption. This feature turns
off the video display and shuts down the hard disk after a period of inactivity.
Power State: [Stay Off]
Power Savings: [Disabled]
Standby Timeout: [Disabled]
Resume On Time: [Disabled]
Resume Time: [00:00:00]
Wake Up On LAN: [Disabled]
¾
HardWare Monitor: