User manual

BIOS Setup
42
Advanced Menu
Reset Configuration Data: [No]
Speaker Volume: [High]
Local Bus IDE adapter: [Both]
SMART Device Monitoring: [Disabled]
PS/2 Mouse: [Enabled]
Large Disk Access Mode: [DOS]
Legacy USB Support [Disabled]
ISA graphics device [No]
Boot-Video device [Onboard]
Onboard LAN BootProm: [Enabled]
QuickBoot Mode: [Disabled]
¾
I/O Device Configuration
¾
PCI/PNP ISA UMB Region Exclusion
¾
PCI/PNP ISA IRQ Resource Exclusion
¾
DMI Event Logging
Reset Configuration Data [No]
[Yes] erases all configuration data in a section of memory for ESCD (Extended
System Configuration Data) which stores the configuration settings for non-PnP
Plug-in devices. Configuration options: [No] [Yes]
Î If you are facing problems after adding or removing any hardware
components to the system it might be wise to select the [Yes] option once.
This allows the BIOS to reconfigure available hardware resources.
Speaker Volume [High]
This field is for the volume control of the installed speaker. Configuration
Options: [High] [Middle] [Low].
Local Bus IDE adapter [Both]
You can select to enable the primary IDE channel, secondary IDE channel,
both, or disable both channels. Configuration options: [Both] [Primary]
[Secondary] [Disabled].