User manual

Connecting Peripherals
33
KYBD
Your BEETLE system has a 6-pin mini-DIN jack for connecting a keyboard.
Make sure that the connector is plugged firmly into the socket to prevent
malfunctioning. Power is supplied to the keyboard via this socket. If you wish to
connect a standard PC keyboard with DIN connector, you must use a special
adapter cable, obtainable from the Wincor Nixdorf International branch office
responsible for your area.
BEETLE keyboards with PS/2 interface may be connected.
PIN # KYB/E
1 KD
2 MSD
3 GND
4 P5VF
5 KC
6 MSC
PS/2 Mouse
You may connect a PS/2 Mouse via an y-cable to the keyboard connector. The
cable is obtainable from the Wincor Nixdorf International branch office
reponsible for your area.
PIN # Signals PS/2
1 GNDFKYHL
2 MSCKF
3 MSDAF
4 P5VFKYHL
LPT1
The standard parallel interface LPT1 is intended for connecting a modular
printer.
You will find more information on how to connect other POS printers and more
POS peripherals (e.g. Cash Drawers) to your BEETLE system in the User
Manuals that come along with your BEETLE system.
Î This LPT1 connector is not a part of the D2 Basic CPU. It is a part of the
LPT adapter cable and available at the rearside of the cabinet.
The LPT1 port is provided with a standard 25 pin D-Sub connector (LPT),
female.